How to Solve Sony Hazel J20i handsfree Jack Problem?

Here's the solution for Sony Hazel J20i in fixing handsfree problem. If something went wrong like if there is no sounds can be heard if the handsfree or loudspeaker is being activated, this solution might help for your repair.

Sony J20i handsfree Problems

• Low sound in earphone.
• No Sound.
• Distorted sound.
• Unbalanced sound.

Sony Hazel J20i Workaround

• Check Volume Level.
• Check with any other working earphone.
• Update your OS

Hardware for Sony Hazel J20i Handsfree Problem

• Clean and re-solder Charging connector as well as on-board connector.
• If same problem Replace the charging connector and check.
• If the problem continuous then replace the Diode V2417.
• If same problem the last and final step Re-hot or Replace N2422 IC.

If you have further Questions please leave a comment.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.

Sony Ericsson Xperia X10i Memory Card Ways Solution

This solution covers for hardware level of repair for SonyEricsson Xperia X10i Memory Card Problem and Also you will find Sony Xperia X10i Memory Card Ways and Jumpers information in the diagrams further in this article.

Problem

• Memory Card not found.
• Not able to store data in MMC.
• MMC not accessible.
• Not able to read MMC.

Manual Solution

• Remove and reinsert memory card and check.
• Go into settings and check memory card status.
• Check with any other good memory card and check.
• Scan memory card for viruses from your PC and check.
• Verify proper action of memory card slot spring, as if it is damaged then your phone won’t read your memory card. In this case replace entire Memory card assembly.
• If everything else fails then format your memory card.

Hardware Solution for Sony Xperia X10i Memory card problem

• Pull up Xperia X10i memory card circuit contacts with the help of a pin to ensure that memory card socket contacts connect with memory card’s contacts.
• Re-solder all the pins of memory card slot.
• Re-solder on-board connector of MMC Card and check.

• Check above mentioned Memory card track ways. If you find any problem or broken any ways then apply jumper.

If you have further Questions please leave a comment.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.

Sony Ericsson Xperia neo V MT11i Touch screen Repair Ways Solution

If you are looking and having trouble finding where to put a jumper if the touchscreen pin connector is already gone or lifted due to water water damaged on Sony Ericsson MT11i. This solution might help you to ease out your hard time finding where to solder a jumper wire on it just to fix a touchscreen not working problem.

Let’s have a look at Sony Ericsson MT11i touch screen problem and its step by step solution.

Problems

• Touch not responding
• Slow Response.

Manual Solution

Here is the manual solution of Sony Ericsson MT11i touch screen problem:

• Restart your Sony Ericsson MT11i and Check.
• Factory Reset your phone (Make sure to Backup your entire data)

Hardware Solution

Here is the hardware solution of Sony Ericsson MT11i touch screen problem:

• Unplug and plug touch screen strip and check.
• Plug-in any other good Touch Screen and Check. This step is to verify whether the problem is in hardware or Sony Ericsson MT11i touch screen is faulty.
• If the problem is in hardware then clean touch on board connector and check.
• Gently heat surrounding components of touch screen and check.
• Re-solder each pin of touch connector and check.
• If same problem check Touch screen track ways marked in below image

• If any Track ways is missing make a jumper with jumper wire.
• If all track ways is working fine but touch screen is not working. This is the last and finnal step is Re-hot the red marked IC gently. Your problem will solved.

• All the above methods will surely solve your problem, but make sure that you check the status of your Touch Screen after every step you perform, as it might be able to solve that problem. 

If you have further Questions please leave a comment.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.