Samsung Galaxy Star GT-S5282 On/Off Switch Ways Repair Solution

One of the most common issues that are found in Samsung S5282 is its power button problem. The reason for this problem could be anything. This could either be due to water damage or just the basic wear and tear. In the case of basic wear and tear, power button losses its Springiness hence you need to press it harder than usual for it to make it work for you or it could either fail completely.

Besides that, a problem in power button might also cause your phone to restart at times, which becomes very much annoying and it troubles you to the masses.

In the following lines you will get to know about Samsung S5282 power button problems as well as their solutions:

Samsung S5282 Problems

• S5282 power button becomes stiff.
• Power button becomes unresponsive.

Workaround

• For S5282 power button problem there is no work around method, however you can try using a pin and move it all around the Samsung S5282 power button, as this might be able to take away some stiffness from your power button.

Tools Required

• Star Screw Driver.
• Plastic Separation Tool.
• Soldering Station.
• Track wire.

Samsung S5282 Power Switch Hardware Solution

Here is the hardware solution for S5282 power button problem:

• When it comes to hardware, the very first thing that you need to do is to re-solder power button strip and check its on-board connector for any loose contacts.
• If the above method not working replace new power button strip.
• Check power switch connection line paths accross to each components where it is being connected.

• If any of the on/off switch + or - track missing then make a jumper.

If you have further Questions please leave a comment.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.