How to Solve Nokia Asha 310 Touch Screen Problem Repair Ways Solution

If you are looking and having trouble finding where to put a jumper if the touchscreen pin connector is already gone or lifted due to water water damaged on Nokia 310. This solution might help you to ease out your hard time finding where to solder a jumper wire on it just to fix a touchscreen not working problem.

Let’s have a look at Nokia 310 touch screen problem and its step by step solution.

Problems

• Asha 310 Touch not responding
• Nokia 310 Touch screen not working.
• Asha 310 Touch screen Problem.
• Slow Response.

Manual Solution

Here is the manual solution of Nokia 310 touch screen problem:

• Restart your Nokia 310 and Check.
• Factory Reset your phone (Make sure to Backup your entire data)

Hardware Solution

Here is the hardware solution of Nokia 310 touch screen problem:

• Unplug and plug touch screen strip and check.
• Plug-in any other good Touch Screen and Check. This step is to verify whether the problem is in hardware or Nokia 310 touch screen is faulty.
• If the problem is in hardware then clean touch on board connector and check.
• Gently heat surrounding components of touch screen and check.
• Re-solder each pin of touch connector and check.
• If same problem check Touch screen track ways marked in below image

• If any Track ways is missing make a jumper with jumper wire.
• If all track ways is working fine but touch screen is not working. This is the last and finnal step is Re-hot or Replace N1000. Your problem will solved.

• All the above methods will surely solve your problem, but make sure that you check the status of your Touch Screen after every step you perform, as it might be able to solve that problem. 

If you have further Questions please leave a comment.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.

Samsung Galaxy Star GT-S5282 On/Off Switch Ways Repair Solution

One of the most common issues that are found in Samsung S5282 is its power button problem. The reason for this problem could be anything. This could either be due to water damage or just the basic wear and tear. In the case of basic wear and tear, power button losses its Springiness hence you need to press it harder than usual for it to make it work for you or it could either fail completely.

Besides that, a problem in power button might also cause your phone to restart at times, which becomes very much annoying and it troubles you to the masses.

In the following lines you will get to know about Samsung S5282 power button problems as well as their solutions:

Samsung S5282 Problems

• S5282 power button becomes stiff.
• Power button becomes unresponsive.

Workaround

• For S5282 power button problem there is no work around method, however you can try using a pin and move it all around the Samsung S5282 power button, as this might be able to take away some stiffness from your power button.

Tools Required

• Star Screw Driver.
• Plastic Separation Tool.
• Soldering Station.
• Track wire.

Samsung S5282 Power Switch Hardware Solution

Here is the hardware solution for S5282 power button problem:

• When it comes to hardware, the very first thing that you need to do is to re-solder power button strip and check its on-board connector for any loose contacts.
• If the above method not working replace new power button strip.
• Check power switch connection line paths accross to each components where it is being connected.

• If any of the on/off switch + or - track missing then make a jumper.

If you have further Questions please leave a comment.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.

How to Solve Nokia Asha 225 Display Ways Problem Repair Solution

here's the dual sim Nokia Asha 225 display connection line paths is case you are going to troubleshoot display problem such blank display, dark screen display, white screen (with tones), No backlight LED that is resulted from due to wet damaged or accidentally dropped issues bu the users.

Following are some of the Asha 225 display problems that you might encounter:

Problems

• White Display
• No Display
• Lines on Display
• Low Light on Display
• No Backlight

Manual Solution

Manual Solution is basically only for low light and Backlight issue, and in order to resolve that all you have to do is to go into settings and check for brightness (Remove check on Automatic Brightness). For Backlight, check backlight settings and timings.

Hardware Solution

• Check the LCD for possiable damaged, cracked or broken. Replace if necessary.
• Check the device firmware, and do a self test and calibration method. update or flash the firmware if necessary it uses RM-782 firmware version.
• Check the LCD pin connector for possiable damaged. Clean, re-solder or replace if necessary.

• Now Check Continuity between Display connector to the resistor compounds. if any of then is track missing then make a jumper.
• If the above procedures doesn't fix the problem the possible faulty is the main engine IC. Try to re-heat or rework it.

If you have further Questions please leave a comment.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.

Samsung I8190 Galaxy S III mini Mic Problem Repair Solution

Samsung S3 Mini I8190 Mic Problem can encounter with it due to any of the reasons. One of the most common problems faced by Samsung Galaxy S3 Mini users is the microphone issue which normally arises due to water damage or moisture. In this type of problem you can hear the voice of others on call, while they are not able to hear you.

In the following lines you will get to know about different Samsung S4 microphone problems:

Problems

• Microphone not working at all.
• Distracted sound is recorded via Mic.
• Distracted sound is received by the other party when talking on call.
• MIC mutes randomly and at any point.
• MIC goes cute on call while it works well during voice recording.

Reasons of Problems

• MIC might have en countered any kind of physical or water damage.
• MIC is faulty.
• The rubber cap of MIC is out of order or is displaced from its correct location.
• MIC might be too much dusty or dirty, hence causing above mentioned problems.
• Dry soldering of MIC connectors could also be the reason of this problem.
• Microphone IC might be faulty.

In order to solve the above mentioned problems, all you have to do is to:

Workaround

• If you are looking for temporary workaround then all you have to do is to use speakerphone, as it uses different microphone in its operation.

Hardware Solution

• Dry your Samsung Galaxy S3 Mini with a dry towel to eliminate any visible traces of water or moisture.
• Remove battery
• Clean all the openings (Headphone port, Charging port etc.) with the help of cotton buds in order to eliminate all possible traces of water and moisture completely.
• Check the MIC hole opening is dust free. If MIC hole is dusty or damaged then clean with PCB cleaner.

• Replace the MIC if u have new mic in hand. if u don't have no problem just remove the MIC apply Resistor fix wire mic also.
• if u dont have 2.2k or 4.7k Resistor no problem its available in nokia 1600 type mobile phone's.

If you have further Questions please leave a comment.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.

Nokia 206 Insert Sim Card Repair Ways Solution

Here's the solution for Nokia 206 for Insert sim card problem or the phone won't recognize or detect any sim card inserted to it. We track down the simcard pin connection as showed on the image below. We can use it for an ease of troubleshooting, if the insert sim card error problem occurred on the device.

Problems

• Insert SIM card error.
• Phone book inaccessible.

Tools

• Jumper wire.
• Soldering Gun.
• Heat Gun / Heat Blower.
• Multi-meter.

Workaround

• Restart your phone.
• Remove, clean and re-insert your SIM card.
• Check with any other SIM card.

Reasons for Problems

• It might be due to dust on SIM Jacket contacts.
• It might be due to faulty capacitors. If any of them is faulty then it will affect your overall SIM card function.
• Issue might also be due to SIM card IC.

Nokia 206 Insert Sim Card Hardware Procedure

• Clean SIM jacket contacts and check.
• Check all capacitors with the help of a multi-meter, if any of them is faulty replace it.
• Check all track ways from sim card connector with the help of a multi-meter, if any of them is faulty make a jumper.
• If everything else fails then gently heat SIM Card IC, if that method doesn’t work then Re-ball or replace IC or remove sim IC and make a jumper with the help of Jumper Wire.

Check our Nokia Asha 206 Display Solution.

If you have further Questions please leave a comment.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.

Sony Ericsson Xperia neo V MT11i Charging Ways Repair Solution

Sony Ericsson Xperia neo V MT11i is its charging problem, and this is mainly because if your charging connector is giving you problems then sooner or later your phone is going to be out of charge hence rendering you completely helpless, therefore it is highly recommended that one should get it fixed as soon as one notices any such charging issues.

In the following lines you will get to know about some of the charging problems related to Xperia Neo V MT11i along with their solution.

Problems

• MT11i is not charging at all.
• Phone charges really very slow.
• Fake Charging.
• Xperia Neo V MT11i heats up during charging.
• Phone does not give any response when charger is connected.

Reasons of Problems

• Phone could be water damaged.
• Dust particles might be present in charging connector.
• Your MT11i charger might be faulty.
• Connection in the phone might be broken.
• Phone is encountered any physical damage.
• Any of the capacitors might be faulty.
• Charging IC might be faulty.

Workaround

• If the charging is slow then all you have to do is to check with any other Sony Xperia charger, but you have to make sure that the charger is original, as slow charging issues almost always occurs with phones using 3rd party chargers.
• Clean battery charging pins and check.
• Clean charging connector pins.

Hardware Solution Neo V MT11i

• After removing body of your neo v MT11i, the very first thing that you need to do is to re-solder the charging connector and check.
• Now check all Track ways marked in below image.
• The next thing that you need to do is to check connector of charging dock, clean the charging dock. If it is still faulty even after cleaning then change the entire charging dock.
• Now check on-board connector, clean and re-solder it.
• Now finally check Charging IC(N1303), gently heat it and check. If heating doesn’t do any good then replace Charging IC and check.

All of the above steps will surely help you to resolve your Sony Xperia Neo V MT11i charging problems in the best possible manner. If you are lucky enough then simple workaround method will get the job done for you.

Check our Sony Ericsson Xperia Neo V MT11i Touch Screen Solution.

If you have further Questions please leave a comment.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.

Nokia Lumia 510 Charging Ways Repair Solution

Nokia Lumia 510 is its charging problem, and this is mainly because if your charging connector is giving you problems then sooner or later your phone is going to be out of charge hence rendering you completely helpless, therefore it is highly recommended that one should get it fixed as soon as one notices any such charging issues.

In the following lines you will get to know about some of the charging problems related to Lumia 510 along with their solution.

Problem

• Nokia Lumia 510 is not charging at all.
• Phone charges really very slow.
• Lumia 510 heats up during charging.
• Phone does not give any response when charger is connected.

Reasons of Problems

• Phone could be water damaged.
• Dust particles might be present in charging connector.
• Your Nokia Lumia 510 charger might be faulty.
• Connection in the phone might be broken.
• Phone is encountered any physical damage.
• Any of the capacitors might be faulty.
• Charging IC might be faulty.

Workaround

• If the charging is slow then all you have to do is to check with any other Nokia Lumia 510 charger, but you have to make sure that the charger is original, as slow charging issues almost always occurs with phones using 3rd party chargers.
• Clean battery charging pins and check.
• Clean charging connector pins.

Tools Required

Following are the tools you need before you plan to go with hardware method

• Soldering Gun.
• Heat Gun.
• Multi meter.
• Plastic separation tool.
• Screw driver.
• Jumper Wire (Copper wire).

Hardware Solution Nokia Lumia 510 Charging Problem

• The very first thing that you need to do is to check voltage at the testing point 1 (as mentioned above in Figure). The voltage should be around 4.9V to 5V. other testing points are for USB connector.
• After removing body of your Lumia 510, the very first thing that you need to do is to re-solder first pin of charging connector and check.
• Check the fuse and diode for possible open and short circuit.
• If same problem Check Charging connector ways marked in below image.

• If any Charging ways is missing then make a jumper with the help of Jumper Wire.
• If all Charging track ways is working means then replace Charging Connector. Your problem will solved.

If you have further Questions please leave a comment.

Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.